Small effort for pick 3

Reply #60

SergeM — Mon, 13 Apr 2015 13:22:51 GMT

Comparative filters n1-n2, n2-n3, n1-n3 with ,=, ,all.

Example: select all, select n1=n3; displays all doubles n1-3 with every n2.

Reply #59

SergeM — Sun, 12 Apr 2015 13:47:16 GMT

I added a comparing filter with multi-selection.

Delta, loops, where are not in it ... yet. [location

Reply #58

SergeM — Mon, 06 Apr 2015 11:39:47 GMT

You can add sets of combinations to the already produced set. Create your subset or just one combination add it to the produced set. You cannot do finer than one combination. That is like saying all the doubles and add combination 321.

I have another checkbox to add, after that it may go to the private section.

Another function is planned, but would like to keep my mind out of this for week at least. I added a chart of pick 3 stats today in my admin section.

I have a bucket full of idea... [ More ]

Reply #57

MonEl — Mon, 06 Apr 2015 02:45:36 GMT

Maybe to make things simpler:

1 = XXX

2 = XXY

3 = XYX

4 = YXX

5 = YYY

6 = YYX

7 = YXY

8 = XYY

Reply #56

MonEl — Mon, 06 Apr 2015 01:35:13 GMT

Of course, the options for:

A, B, C, D, E.

F, G, H, I, J.

Can be from 0 to 9 digits for each of them.

Reply #55

MonEl — Mon, 06 Apr 2015 01:17:00 GMT

Serge

Since you instead like to make 1 custom filter to replace all filters, I will give you an idea for the pick 3 straight filters of this kind:

This way all of these filters:

Straight Even-Odd

Straight Low-High

Straight In-Out

Straight Bala-Nced

And more, can be created with only ONE custom filter.

X = A, B, C, D, E.

A = ?

B = ?

C = ?

D = ?

E = ?

-----

Y = F, G, H, I, J.

F = ?

G = ?

H = ?

I = ?

J = ?

--------

XXX

XXY

XYX

Reply #54

SergeM — Sun, 05 Apr 2015 12:27:17 GMT

You can now add sets.

Reply #53

SergeM — Sun, 05 Apr 2015 11:50:11 GMT

I could do Ricky's, but don't follow any model but some logic. I will add one or two options next, but not today or within a week.

You mention pre-selections and want to base all of it on that.

I have seen the custom filter once and no other filter with it as it does any filter! I don't remember how it was worked out. Mostly you don't get all options. With mine you can make groups of different lengths. I have to review LSP to see what is not in it, and I believe it is the custom filter.... [ More ]

Reply #52

MonEl — Sun, 05 Apr 2015 05:27:16 GMT

Serge

Now the pick 3 wheeler is of some use, it can filter out:

Singles

Doubles

Triples

The Even-Odd Boxed

The Low-High Boxed

The In-Out Boxed

The Bala-Nced Boxed

And it can do the above on Straight and on Boxed numbers.

I am not sure, but it might be the only software that can filter the Bala-Nced filter boxed.

-------------

Next, if and when you have the time and if you want to, you can make some straight filters:

You probably already know about them

Reply #51

SergeM — Sat, 04 Apr 2015 22:30:40 GMT

I added a filter for:

Single Double Triple

Reply #50

SergeM — Tue, 24 Mar 2015 14:16:55 GMT

Are you kidding

Reply #49

MonEl — Tue, 24 Mar 2015 05:31:18 GMT

You know Serge, that while it might be good for you to learn how to make filtered wheelers, when it comes to the pick 3 and maybe also the pick 4 game you really don't need to, as there already are more or less, maybe somewhat less, good enough software out there, some are free and the others people have to pay for, some are online and some are offline.

As for jackpot kinds of games, there are a few filtered wheelers, but they are not quite good enough, they don't have enough filters on them,... [ More ]

Reply #48

SergeM — Mon, 23 Mar 2015 13:16:55 GMT

I have no plans to extend the filter this week, I have enough things to do.

Reply #47

SergeM — Mon, 23 Mar 2015 13:06:41 GMT

If you want to get only doubles for 1.

Check custom: 1

Check allowed: 2

Use set

Click button

You don't have to check all numbers in the first place. Don't you eliminate or select?

The software allows every filter.

In case you want to play all doubles from 0 to 9, you set 10 custom filters.

If you want it boxed on the top, I seriously suggest that you type them or use a pen and paper.

I would write straight on the tickets.

For using multiple doubles, I let you think... [ More ]

Reply #46

MonEl — Mon, 23 Mar 2015 03:14:25 GMT

The online sotware has on its memory the pick 3 numbers that were left from the last workout.

Let us now just look at the Bala-Nced Filter:

1 2 4 5 8 = Bala = B

0 3 6 7 9 = Nced = N

-----------------------------------

First we set the Custom Filter like this:

We are going to work with the BALA portion of the filter, cause this is how things are done with this particular software:

So I am going to set the BALA pattern:

1 2 4 5 8 = Bala = B

Custom filter:

0 1 2 3... [ More ]

Reply #45

MonEl — Mon, 23 Mar 2015 02:50:54 GMT

Now on the next post, we will see about using the BALA-NCED filter on those boxed pick 3 combos that we have left.

Reply #44

MonEl — Mon, 23 Mar 2015 02:49:27 GMT

All is right, now as I posted it.

The problem is just that I am NOT used to filtering in that way, it is easier with software like in the Lottery Post and on the LotSoft Free Wheeler.

But everything is COOL now.

Reply #43

MonEl — Mon, 23 Mar 2015 02:45:39 GMT

I double checked everything and this is right:

Now we can try the Low-High filter:

Remember, have we have done so far is on the software's memory.

On the Low-High we are going to filter out all the pick 3 numbers that have 2 High Digits On Them.

So there will ONLY be pick 3 numbers that have:

0 High Digits on them

1 High Digit on them

3 High Digits on them

Like:

204

393

999

So:

To do that we need a LOW Count of: 3, 2 and 0, so:

That is, LOW Count of 0, 2... [ More ]

Reply #42

MonEl — Mon, 23 Mar 2015 02:37:32 GMT

I deleted the last post cause I made a mistake, I guess.

Reply #41

MonEl — Mon, 23 Mar 2015 02:08:42 GMT

Serge

Doesn't yet have a way of filtering out the Doubles and the Triples,

But he has the Boxed Even-Odd and the boxed Low-High.

He shows the Even-Odd as ODD, but with he way that is all that is needed, for example.

On a pick 3 number there can be pick 3 numbers that have just ONE ODD DIGIT, for example:

470

For example:

If out of the FULL Source of 220 boxed numbers you just want to filter OUT ALL Pick 3 Numbers that have 1 ODD Digit, then you do this now:

Remember his s... [ More ]

Reply #40

MonEl — Mon, 23 Mar 2015 01:34:57 GMT

Now I will try to make those 1000 straight pick 3 numbers into the 220 boxed pick 3 numbers:

The only things that I have to do now after first doing what I did above is:

Check the 3 Lth boxes on OPTIONS :

Options:

/Boxed - Wanorde - D sordre

/Use the produced set for filters

/Use comma separation

And Press the PICK 3 BOX , that is Click It:

Pick 3

That should produce the 220 Boxed pick 3 numbers:

000, 001, 002, 003, 004, 005, 006, 007, 008, 009, 011, 012, 013, 014,... [ More ]

Reply #39

MonEl — Mon, 23 Mar 2015 01:21:24 GMT

Serge

I understand, I think, let us see, I am going to try it right now.

----------------------

First let us get all the 1000 straight numbers:

On the fist 3 horizontal lines I check all the digits:

Now on the:

Low Count and On The Odd Count I check Everything.

The Custom Filter I leave it alone as it is there:

The OPTIONS I leave ALONE as it is, I don't do anything with it.

Now I press the Pick 3 Box:

That Should produce and show the 1000 Straight Numbers:

YES,... [ More ]

Reply #38

SergeM — Sun, 22 Mar 2015 22:33:33 GMT

I go on, minutes later.

I check use the set ... .

I check with custom: 0

I check with allowed: 1.

I check use comma ... .

I click on the button.

I get:

011, 012, 022

Reply #37

SergeM — Sun, 22 Mar 2015 22:27:44 GMT

As you could log in with Lotterypost,

I don't have to tell you to use cookies.

Reply #36

SergeM — Sun, 22 Mar 2015 22:22:55 GMT

Example:

I check.

0 1 2

0 1 2

0 1 2

I click the button.

I get.

000 001 002 010 011 012 020 021 022 100 101 102 110 111 112 120 121 122 200 201 202 210 211 212 220 221 222

I check: use the produced set ... .

I check: boxed .

I check: use the comma separation .

I click the button.

I get.

000, 001, 002, 011, 012, 022, 111, 112, 122, 222

I can go on like that.

Reply #35

SergeM — Sun, 22 Mar 2015 22:15:42 GMT

I don't have a screen cam to make a little movie on Windows 8.1. So I have to type the how to do it.

First of all:

Check all numbers for Nr.1, Nr.2 and Nr.3.

With that the main job is done, believe it or not.

If you click now on the button, you get the straight output.

When you did this, the output has appeared under the button.

If nothing happens, it means that you did not use all three rows.

A minimum is three numbers.

At this point you can use the produced set. To use... [ More ]

Reply #34

MonEl — Sun, 22 Mar 2015 15:55:12 GMT

Serge

Whatever Use the produced set for filters is, I could not make it do anything at all, checking that box made sure that Nothing at all would happen, with that box checked none of the other boxed would work at all, the software would not produce any pick 3 numbers at all.

Reply #33

SergeM — Sun, 22 Mar 2015 12:06:01 GMT

If you have problems with the location of the wheeler on the page, just snap the window to the right or left side. The blocks will come under each other. You can snap LP to the other side and work on both pages.

Reply #32

SergeM — Sun, 22 Mar 2015 11:39:48 GMT

I just created the option for comma separation. That should do it for LP.

Reply #31

SergeM — Sun, 22 Mar 2015 11:11:05 GMT

Check Filter produced set to filter the received set of combinations.

With that you can keep or remove singles, doubles or triples too.

If you need comma separation for Lotterypost predictions, I can make an option for that.

Reply #30

SergeM — Sun, 22 Mar 2015 01:35:11 GMT

This is the first version of the custom filter, that is why it works once.

I have more ideas, but need to think them over. For the site I get ideas like donate button or membership. So far it is all open. I mainly think locally, you mention your country.

Reply #29

MonEl — Sun, 22 Mar 2015 00:08:25 GMT

Serge

Being able to make custom filters is a great idea, now you can have 3 BOXED pick 3 filters that you say that can be used on the 1000 straight and or on the 220 boxed.

Would it be possible for the pick 3 to have a sort of box or place where a person can PASTE any straight or boxed pick 3 numbers and then have your online software filter them out.

One of the reasons for having such a thing is that as it is right now, The Custom filter can be set just one time, that is it can be set

Reply #28

SergeM — Sat, 21 Mar 2015 18:24:22 GMT

You have to click on the button with text Pick 3.

If no numbers show, then you did an overkill with the filter.

For example if you had only even numbers as number 1,

and you want only combinations with three odd numbers,

then you filtered the set down to zero rows.

The combinations output comes under the button.

The page will load at the pick 3 form.

You need to check at least one number per row as it is pick 3.

You cannot validate a ticket with only 2 digits crossed for

Reply #27

SergeM — Sat, 21 Mar 2015 18:22:38 GMT

First a tip, if you want to get back to what you marked, go back in history with the browser, by clicking the back-button.

Reply #26

lakerben — Sat, 21 Mar 2015 18:05:49 GMT

Great idea!

I checked the numbers but where is the output

Reply #25

SergeM — Sat, 21 Mar 2015 17:33:26 GMT

Example:

You selected all digits in every position.

You want combinations with:

1 and 2 odd numbers

1 and 2 low numbers

0 and 2 custom set numbers {0,1,8,9}

You want to get the combinations boxed.

Reply #24

SergeM — Sat, 21 Mar 2015 17:26:56 GMT

If you use the custom filter and your

inner set is 2 3 4 5 6, then mark those under custom

set the allowance by un-checking what you don't want in your result set.

Reply #23

SergeM — Sat, 21 Mar 2015 17:19:53 GMT

So, I did the filters for pick 3 wheeling and introduced the boxed-option too.

A filter is custom, so if you want any set of numbers as custom filter, you can do it!

The link: Pick 3 wheeler - straight | boxed | filtered | custom filter***** !

For the custom filter, mark your selected set and set the allowance.

In any case, not specifying filters, you get a the straight combinations.

Reply #22

SergeM — Sat, 21 Mar 2015 00:44:34 GMT

Pick 3 positional straight in one way. If you would do straight on some roulette board like pane, you look for divisors.

1-2-4-5-8-10-20-25-40-50-100-125-200-250-500-1000

Besides, there are groups on the wheel, but in pick 3 there is no wheel.

...

Reply #21

MonEl — Sat, 21 Mar 2015 00:37:39 GMT

Maybe I should, prediction is prediction, roulette or the lottery.

But I probably won't, I would only if there was a local casino.

Reply #20

SergeM — Sat, 21 Mar 2015 00:34:53 GMT

Then it is about time you do that and study the wheel, the board and the announces. You have much to learn.

Reply #19

MonEl — Sat, 21 Mar 2015 00:33:35 GMT

I have never gone to any casino anywhere, I am one of the very few people that have not done that.

On the computer I have played the roulette game a few times long ago.

Reply #18

SergeM — Sat, 21 Mar 2015 00:31:41 GMT

You can go there once a month, if your income is good. Don't go two days in a row, it is addictive.

Reply #17

MonEl — Sat, 21 Mar 2015 00:28:37 GMT

It would be nice to have a local roulette lottery game, it could be done using very many lottery balls and they would draw out 1 of those balls, the rules and the pay outs could be about the same as on the roulette, but the lotteries would want to pay much less than the casinos, but at least the rules could be the same or about the same.

Reply #16

MonEl — Sat, 21 Mar 2015 00:18:22 GMT

Well, we all do as we want to do!.

Reply #15

SergeM — Sat, 21 Mar 2015 00:16:02 GMT

You mean outer and inner, like extreme and center. I don't support it.

Reply #14

MonEl — Sat, 21 Mar 2015 00:14:41 GMT

The In-Out is based on this:

0 1 2 3 4 5 6 78 9 = Out-Side(s).

0 1 2 3 4 5 6 7 8 9 = In-Side.

I myself created that filter years ago.

Reply #13

SergeM — Sat, 21 Mar 2015 00:09:32 GMT

At roulette some call it hi-lo. You bet the six lowest and the six highest, or something like that. Some play it alternatively.

Reply #12

SergeM — Sat, 21 Mar 2015 00:06:56 GMT

In Belgium we have the joker+. It is a number on your Euromillions or lotto ticket. It has 6 digits. Online, you need to play two of them. It comes with a zodiac sign. Both ends and the sign can make you win. Pick 6, by both ends plus the sign for 1.50 EUR.

Reply #11

MonEl — Sat, 21 Mar 2015 00:05:18 GMT

Not Ricky's, but mine, but yes Ricky put it on his program.

Reply #10

MonEl — Sat, 21 Mar 2015 00:03:58 GMT

You have that 0 to 9 pick 6 game on Belgium?

Straight it would be 100, 000 numbers, quite a lot!

Who would play that kind of game

Reply #9

SergeM — Sat, 21 Mar 2015 00:03:25 GMT

I believe that was Ricky's. I have finer ideas.

Reply #8

MonEl — Sat, 21 Mar 2015 00:01:30 GMT

Now make the In-Out filters, of course just make the boxed In and that will also take care of the boxed Out.

In = 3, 4, 5, 6 and 7

Out = 0, 1, 2, 8 and 9

So:

In = 0, 1, 2 and 3 counts and that will take care of the boxed In-Out Filters.

Reply #7

SergeM — Fri, 20 Mar 2015 23:58:07 GMT

Pick 6, we call it joker. You would have to click yourself through it or save paper tickets.

We also have bigger, see https://www.lotterypost.com/game/399 for example.

Reply #6

MonEl — Fri, 20 Mar 2015 23:55:35 GMT

Serge

There are pick 3, 4 and 5 games of that kind.

But there is no 0 to 9 digits pick 6 games yet, anywhere that I know of, but I might be wrong, if there is any 0 to 9 pick 6 game of that kind I never heard of it yet.As to filters, yes that is a very good idea.

Reply #5

SergeM — Fri, 20 Mar 2015 23:51:06 GMT

I added a filter for odd and low count for pick 3.

Reply #4

SergeM — Fri, 20 Mar 2015 19:53:40 GMT

Filters are for later. Good luck selecting the numbers.

Serge

Reply #3

SergeM — Fri, 20 Mar 2015 19:36:15 GMT

I added a Pick 5 positional straight wheel at click here to go there.

I added a Pick 6 positional straight wheel.

Reply #2

SergeM — Fri, 20 Mar 2015 19:11:03 GMT

I added a Pick 4 positional straight wheel at click here to go there.

Reply #1

MonEl — Fri, 20 Mar 2015 17:03:39 GMT

I have not done anything like that for a very long time, but I did something very fast, I of course can't share it, sorry.

But this is what I did:

First, a filtered wheeler, like of the kind of the LotSoft FreeWheeler needs to be used or the whole filtration process can be automated with software made to do it.

Anyhow, the quick and very simple filtration prediction workout has 2 kinds of filtration-prediction filters:

A few 100% static filters, by this I mean that those few filtrati... [ More ]

Small effort for pick 3

SergeM — Thu, 19 Mar 2015 22:37:22 GMT

I have been asked to make a system that like when you enter the 2 last drawings, the computer returns a few combinations to play. I have a few ideas on that for special cases but do think it is fiction.

So, I just added a straight positional wheel at the link.

If you have special ideas, you always can message me.