A Pick 3 System Based On "Digits In Common With Previous Draws"

Reply #29

Gwoof — Thu, 13 Jun 2019 16:56:25 GMT

mitachoo

How are you making out with the program?

GW

Reply #28

mitachoo — Mon, 03 Jun 2019 16:21:37 GMT

Yup, as soon as I get the P3 part of it to work the way I want it to! Plus I made a bunch of other improvements. Will update here when ready.

Reply #27

Gwoof — Mon, 03 Jun 2019 12:00:43 GMT

mitachoo

Are you going to update the program to include the P4 games?

GW

Reply #26

mitachoo — Sat, 01 Jun 2019 11:38:03 GMT

Ah, fudruckers. As I was re-doing my spreadsheet to add linkage to Cash 5 I found an error. The OUT filter was initially intended to capture Root Sums that were out for the last two draws; being Root Sum based, 0 was muted. In other words, as configured now, 0 will never be flagged as an Out number, even when it is.

The fix is simple; copy the formula from cell GL7 into cells GK7 to GK734.

Reply #25

powerball1 — Sat, 01 Jun 2019 00:36:57 GMT

to RL so u are saying you run your stacks and then the values u get is what you feed into the rogues on ultra? or your first program gave you the 36 numbers that dont have to be fed into ultra 34?

thanks

Reply #24

RL-RANDOMLOGIC — Fri, 31 May 2019 20:06:51 GMT

mitachoo

I made a few updated to the stack program and ran a mock setup setting 5 stacks to single values

for my pick-3 game. The program reduced the matrix from 1000 to 36 lines and the second picture

shows the Ultra-34 check option with the results. Not bad at all provided one could hit the stack

values.

RL

Here are the results of the 36 lines, 1ea straight and 5-box hits.

Reply #23

dr san — Fri, 31 May 2019 19:14:27 GMT

mito

Look at this example

last draw

859

sum of pairs

85 = 13 = 4

59 = 14 = 5

89 = 17 = 8

4,5,8

The next one was drawn = 467

repeated i couple sum digit 4

Reply #22

mitachoo — Fri, 31 May 2019 15:20:49 GMT

. . . the user could set a range for how many numbers/ digits would repeat from the

previous game, then the previous previous game etc all the way up to 20 games

I was originally thinking along those lines and at one point I had 10 flavors of each of my three filters, looking at digits in common to draws 30, 60, 90, etc, days back, but I ended up ditching it to simplify the analysis.

Reply #21

mitachoo — Fri, 31 May 2019 14:58:06 GMT

Found it! Will check it out.

https://www.lotterypost.com/thread/326944

Reply #20

RL-RANDOMLOGIC — Fri, 31 May 2019 14:54:24 GMT

On a brighter note, you have prompted me to dust this old tool off and give it another chance.

I have a on going post for another tool called Ultra-34, I think I may rewrite this old tool and

apply it to the rogues and see what happens. The ultra data is somewhat predictable so it's

worth a shot, who knows, always looking for a better way.

RL

Reply #19

mitachoo — Fri, 31 May 2019 14:47:42 GMT

Please don't think that I am trashing your attempts here

Not at all RL, I appreciate your input! There's a reason those of us who have been part of LP for 10+ years are STILL here . . . that snip randomness will NOT be foiled!

This post has been automatically changed by the Lottery Post computer system to remove inappropriate content and/or spam.

Reply #18

RL-RANDOMLOGIC — Fri, 31 May 2019 14:44:53 GMT

Here is another pic showing the analysis data for stack-A. This would be the number of digits / numbers

that repeat from the previous draw. I experimented using many different data collection as per the number

of games grouped into each stack. This tool now resides in the junk drawer with hundreds of other tools

that were almost but not quite.

RL

Reply #17

RL-RANDOMLOGIC — Fri, 31 May 2019 14:37:34 GMT

Every strategy I ve come up with is ALMOST, but not quite, repeatable. That's because the

game is random. If you do the math you will find that the results are a product of the matrix

and nothing more. For this method to be useful the data needs to be predictable. Your first

step should be to test the randomness of the 3-digit patterns to see if they can be predicted

to some degree, you must consider that all 64 patterns are in play every game. Years ago

winsum asked about wri... [ More ]

Reply #16

mitachoo — Fri, 31 May 2019 14:11:00 GMT

I assume you're referring to the Root Sums input. The options are ALL, LIST, and 1 through 9 individually. To put in a custom list, select LIST and input a string of numbers you'd like to evaluate in cell U12.

By string I mean, for example, input 14589 to have the macro include only Root Sums 1, 4, 5, 8, and 9.

Reply #15

fashohits — Fri, 31 May 2019 13:01:38 GMT

I downloaded your wonderful work but am unable to put numbers in where it says use dropdown box to put in numbers. I appreciate any guidance you can provide

Reply #14

dr san — Fri, 31 May 2019 12:24:56 GMT

MITA, you can use willpower,

this from the post of repeated positions and patterns ok

Reply #13

ram — Fri, 31 May 2019 12:22:16 GMT

Thank you for making your work available mitachoo. A concept that's outside the box for sure. I'll

load my databases and see what happens. Much appreciated.

ram

Reply #12

mitachoo — Fri, 31 May 2019 12:11:23 GMT

Ohhhh . . . now THAT I hadn't thought of . . .

Reply #11

mitachoo — Fri, 31 May 2019 12:10:12 GMT

I actually initially had Lo/Hi and Even/Odd in the mix as will, you can find remnants of it in the hidden columns, but I ended up taking it out. Perhaps I was a bit hasty . . .

Reply #10

dr san — Fri, 31 May 2019 12:09:29 GMT

you can make your system also upright from the 3 positions

of the last 3 draws

ex

458

159

083

1st position = 410

2nd position = 558

3rd position = 893

So you have both horizontal and vertical conditions.

Reply #9

dr san — Fri, 31 May 2019 12:00:30 GMT

mita, besides the digits you can also use in each position of the last draws

the patterns / even / odd / low / high

So

criterion = number of patterns repeating from previous

so besides the repetition digits you can also see when you repeat the pattern

ex = 457 previous

613

ex = in the 1st position repeated the pattern pair

in the 2nd position he repeated the odd

and in the 3rd position repeated the odd

In this example there was a repetition of the three positions

Reply #8

dr san — Fri, 31 May 2019 11:49:04 GMT

mita and winsum, good approach, you can use the system of three patterns = bigger, smaller and equal

with reference of the last draw, we will cross or combine with your system, it will be a good form of reduction, you can use the will

Reply #7

winsumloosesum — Fri, 31 May 2019 11:38:18 GMT

Thanks for the file. Will take a look at your work today.

Looks very interesting

Reply #6

mitachoo — Fri, 31 May 2019 11:14:06 GMT

OK, here we go! You can download the file from the link below. I've added explanatory notes throughout the document but don't hesitate to contact me if you have any questions. I'll start summarizing herein what I have tried in terms of using the generated data to narrow-down the pool for future draws.

http://bit.ly/CWP_System_Rev_L

Reply #5

mitachoo — Fri, 31 May 2019 04:07:11 GMT

Allrigthy, cleaning up the file as we speak . . .

Reply #4

lakerben — Fri, 31 May 2019 03:55:15 GMT

I'm ready when you are.

Reply #3

mitachoo — Fri, 31 May 2019 01:05:56 GMT

I don't think I've ever shared a file here, what's the best way to do this? Can I post a link to the Excel file, it's saved in the same location as the images that are linked in my post.

Reply #2

mitachoo — Fri, 31 May 2019 00:57:06 GMT

I figured you would, I've seen many contributions from you in this Forum relative to Excel-ing stuff

Reply #1

winsumloosesum — Fri, 31 May 2019 00:46:26 GMT

I would be interested.

Thanks

A Pick 3 System Based On "Digits In Common With Previous Draws"

mitachoo — Fri, 31 May 2019 00:13:49 GMT

Greetings everyone! I ve been working on a system for Pick 3 based entirely on trends of digits common to the previous drawing , and while I ve come up with a nifty tool, I m struggling with how exactly to use the information the tool spits out to narrow down the field for the next drawing. Every strategy I ve come up with is ALMOST, but not quite, repeatable.

The premise of the system is relatively simple: narrow the field of possibilities for the next drawing to combinations that meet... [ More ]