covermaster- need help

Reply #17

RJOh — Wed, 03 Dec 2003 02:03:13 GMT

BobPI never noticed that Configure tab, I've been adding some parameters and changing the txt extension so my lottery program could read the file and swap numbers and add the file to a list of wheel. Learn something new everyday.RJOh

Reply #16

BobP — Tue, 02 Dec 2003 00:24:23 GMT

Go back and print out what I wrote and try again with paper in hand. If you only want to replace one or two pointer numbers with your numbers, just change two of them and click APPLY. If you think pointer number 01 should be 49 just type 49 in the box next to 01, then APPLY. The only problem would be if you were trying to use the same number twice. When you go back and click DISPLAY, your number 49 will be there instead of the 01 pointer on the grid where ever the 01 would have been only on

Reply #15

luckycat — Mon, 01 Dec 2003 23:56:47 GMT

rjoh/ ok I will go back and look at transposeI know I like it so far.just need to use it.will be back to let u know ok see you soon

Reply #14

luckycat — Mon, 01 Dec 2003 23:54:29 GMT

bob preally trying :ok what u said was abouth the numbers on left will have 24 numbers. NOWthat the problem HOW. I don want to replace all 24 just want to change maybe 12 to include last 2 draws. how??? replace?? how. i understan click to apply but if I dont get to put my numbers in the already made wheel just generated,.then it says display DID and nothing showing.how can I get the last 2 draw numbers in and regenerate to give me a wheel with those numbers included in thw wheel??its probly so... [ More ]

Reply #13

RJOh — Mon, 01 Dec 2003 00:30:05 GMT

Luckycat this also may help you,When you first start up CoverMast, a blank screen comes up with default cover parameters on the left side of the screen. You need to set these first. Pool : number of numbers in the wheel you wantPick : the number of numbers in the draw(6 for SuperLott, 5 for Buckeye5)Match : the size of the match you want guaranteedHits : this has to be at least size of match and no larger than numbers drawnTickets: leave blank, program will fill in as numbers are gener... [ More ]

Reply #12

BobP — Mon, 01 Dec 2003 00:16:14 GMT

Quote: Originally posted by luckycat on November 30, 2003 rjoh: re >covermastertried 5/ and 6 pick with pool at 20/30/39/49 none worked. seemed like it only did GENERATE with up to pool 18. meaning all tickets were with numbers t1 thr 18. tried to add numbers in little window clicked set than apply and noting happened, generated numbers were same again. as preevious chart. it seem like I can only click on 1 numner in ltl window and nothing eles.sure hope to learn this as it seem l... [ More ]

Reply #11

luckycat — Sun, 30 Nov 2003 23:13:18 GMT

rjoh: re >covermastertried 5/ and 6 pick with pool at 20/30/39/49 none worked. seemed like it only did GENERATE with up to pool 18. meaning all tickets were with numbers t1 thr 18. tried to add numbers in little window clicked set than apply and noting happened, generated numbers were same again. as preevious chart. it seem like I can only click on 1 numner in ltl window and nothing eles.sure hope to learn this as it seem like a great wheel. can u tell me what I am doing wrong... [ More ]

Reply #10

luckycat — Sun, 30 Nov 2003 01:52:46 GMT

rjoh:now I know why I will test on pic 5 then or6 thanks for input.very frustrating

Reply #9

RJOh — Sat, 29 Nov 2003 17:01:09 GMT

Luckycat,Covermaster doesn't work with 3 and 4 digits numbers which pick3s and pick4s really are. It doesn't use zero as a number but as a place holder and numbers can only appear in a combinations once, so it won't work with numbers like 021 and 133 and 444 when entered as 3 single digit numbers. Numbers like 123,321,231 and other box forms of the same numbers and are seen as the same numbers, so it doesn't generate box forms of a number already picked. If you want to wheel numbers for the p... [ More ]

Reply #8

luckycat — Sat, 29 Nov 2003 14:34:35 GMT

went this far:went to cofig/my numbers set little screenclicked on 8 apply nothing happenedconfig again numbers memory nothing again'I was uesing the pick 3 to test on to get used to useing. But I have not been able to put any numbers in config> and generate any new combos.pool 10 3 3 examplemaybe it wont work for pick 3, I would like to load last 10 draws and then generate a pos pick?? can covermaster do this.if not can iit do it for other games anyone useing it for other... [ More ]

Reply #7

luckycat — Sat, 29 Nov 2003 12:54:00 GMT

IRVINLOTTOSHLEP

Reply #6

RJOh — Sat, 29 Nov 2003 08:33:30 GMT

Luckycat,If your wheel will contain all the numbers in the last drawing, then you can load up a text file containing those numbers and generate additional numbers to complete the wheel. You can also do this to include your lucky numbers in your wheel. For example if you want to include Ohio Super Lotto numbers for 11/26/03 17-19-23-24-28-46, you could put those numbers in a text file, load it and complete a wheel that has at least 46 numbers. I've done this by including the last 20 draws and co... [ More ]

Reply #5

lottoshlep — Sat, 29 Nov 2003 04:51:32 GMT

Luckycat,not sure I understand your question correctly but CoverMaster will not generate or pick numbers to play. It is not designed for that. It will make wheels for you, you must supply predictions by other means.Try this simple wheel as an example:Pool:10> Pick:6> Match:5> Hits:6> Generate>Start> ... you'll get 15 lines ... >Finished.go to Configure>Own Numbers>Set ... now you can put in the 10 preds you want to wheel ...>Apply.go to Configure>Own Numbers>Display ... the wheel is now 'popula... [ More ]

Reply #4

Irvin — Sat, 29 Nov 2003 04:29:00 GMT

Luckycat,Once you have created a wheel you can change the numbers for the ones you want to use.Just click on configure and select own numbers A little box will appear for you to change the numbers.I use covermaster with Peters wheels web page.Hope that helps.Regards,Irvin

Reply #3

luckycat — Sat, 29 Nov 2003 03:46:52 GMT

rjoh;IS THERE ANYWHERE I can put in last draws. to generate dif numbers?did instructions/ but all th samethx

Reply #2

luckycat — Sat, 29 Nov 2003 02:46:09 GMT

rjoh:you are super nice/ thanks for info got it/ printed it/ now I have to digest it.thanks so much.

Reply #1

RJOh — Sat, 29 Nov 2003 02:24:14 GMT

Go to http://www.lotto-logix.com/wheellinks.html and download the instruction sheet Temp.Doc. You can read it using Wordpad. If you don't want to do that just set the parameters of the wheel you want and click generate and you will see it working. Then you can just click other features and see how they work. Warning--Don't start off with a very large wheel unless you have some time to wait.RJOh

covermaster- need help

luckycat — Sat, 29 Nov 2003 02:08:50 GMT

just downloaded covermaster/ however no instructions as to how to use or make it workanyone useing it can u help ? thanks a bunch